7th Grade Measurement and Geometry



Home > Mathcasts Library > By Grade Level > K-7 > 7th Grade > 7th Grade Measurement and Geometry


 

 

 7th Grade Measurement and Geometry:  Standards and Practice Problem(s)
Mathcasts
+
ExamView
7MG.1.0 Students choose appropriate units of measure and use ratios to convert within and between measurement systems to solve problems.

 
7MG.1.1 Compare weights, capacities, geometric measures, times, and temperatures within and between measurement systems (e.g., miles per hour and feet per second, cubic inches to cubic centimeters).
   
7MG.1.2 Construct and read drawings and models made to scale.
   
.
7MG.1.3 Use measures expressed as rates (e.g., speed, density) and measures expressed as products (e.g., person-days) to solve problems; check the units of the solutions; and use dimensional analysis to check the reasonableness of the answer.
   
   
7MG.2.0 Students compute the perimeter, area, and volume of common geometric objects and use the results to find measures of less common objects. They know how perimeter, area, and volume are affected by changes of scale.

 
7MG.2.1 Use formulas routinely for finding the perimeter and area of basic two-dimensional figures and the surface area and volume of basic three-dimensional figures, including rectangles, parallelograms, trapezoids, squares, triangles, circles, prisms, and cylinders.
   
   

7MG.2.2 Estimate and compute the area of more complex or irregular two-and three-dimensional figures by breaking the figures down into more basic geometric objects. 

   

   

7MG.2.2
7MG.2.3 Compute the length of the perimeter, the surface area of the faces, and the volume of a three-dimensional object built from rectangular solids. Understand that when the lengths of all dimensions are multiplied by a scale factor, the surface area is multiplied by the square of the scale factor and the volume is multiplied by the cube of the scale factor. 

   

 
2.4 Relate the changes in measurement with a change of scale to the units used (e.g., square inches, cubic feet) and to conversions between units (1 square foot = 144 square inches or [1 ft2] = [144 in2], 1 cubic inch is approximately 16.38 cubic centimeters or [1 in3] = [16.38 cm3]). 

   

 7MG.2.4
7MG.3.0 Students know the Pythagorean theorem and deepen their understanding of plane and solid geometric shapes by constructing figures that meet given conditions and by identifying attributes of figures.

 
7MG.3.1 Identify and construct basic elements of geometric figures (e.g., altitudes, mid-points, diagonals, angle bisectors, and perpendicular bisectors; central angles, radii, diameters, and chords of circles) by using a compass and straightedge.
    
 7MG.3.1
7MG.3.2 Understand and use coordinate graphs to plot simple figures, determine lengths and areas related to them, and determine their image under translations and reflections.  

   

 7MG3.2

2 available

7MG.3.3 Know and understand the Pythagorean theorem and its converse and use it to find the length of the missing side of a right triangle and the lengths of other line segments and, in some situations, empirically verify the Pythagorean theorem by direct measurement. 

   

 7MG3.3
7MG.3.4 Demonstrate an understanding of conditions that indicate two geometrical figures are congruent and what congruence means about the relationships between the sides and angles of the two figures. 

   

.7MG3.4
7MG.3.5 Construct two-dimensional patterns for three-dimensional models, such as cylinders, prisms, and cones. 

   

 7MG3.5
7MG.3.6 Identify elements of three-dimensional geometric objects (e.g., diagonals of rectangular solids) and describe how two or more objects are related in space (e.g., skew lines, the possible ways three planes might intersect). 

   

7MG3.6

Keywords:

 

Source: www.csun.edu/~vcmth00m/practice.html


Home > Mathcasts Library > By Grade Level > K-7 > 7th Grade > 7th Grade Measurement and Geometry


 

Site Meter